Triply periodic minimal surface (TPMS) lattices offer high structural efficiency for lightweight energy absorption, yet the effects of chopped fiber reinforcement and post-processing on their mechanical response remain poorly quantified. This study systematically investigates the mechanical behavior of additively manufactured gyroid TPMS lattices fabricated from five polymeric filaments—VeroWhite, Nylon 12, ABS, carbon fiber-reinforced PLA (PLA-CF) and polyphthalamide (PPA-CF)—across relative densities of 20–40%. Experimental results show that annealed fiber-reinforced lattices, particularly PPA-CF, consistently outperform unreinforced polymers in terms of peak stress, toughness, and energy absorption, with performance gains becoming more pronounced at higher relative densities. Post-print thermal annealing of PPA-CF increases its peak stress by 40% and toughness by up to 60%, while altering its post-yield deformation stability. Annealed PPA-CF gyroids achieve specific energy absorption values of up to 24–25 kJ/kg at densities of 200–430 kg/m3, comparable to reported metallic TPMS structures, at substantially lower weight. Finite element analysis reveals elevated stress localization and increased plastic strains in fiber-reinforced lattices, consistent with the experimentally recorded post-elastic ductility trade-offs. These findings demonstrate that chopped fiber CF reinforcement, in combination with thermal post-processing, fundamentally modifies deformation behavior and enables high-performance, lightweight TPMS architectures through coordinated control of relative density and processing.
@article{hussain2026chopped,title={Do chopped fibers matter? Process--structure--property relationships and thermal annealing effects in fiber-reinforced TPMS lattices},author={Hussain, Shahadat and Mehraj, Haris and Moustafa, Mohamed and Karathanasopoulos, Nikolaos},journal={Progress in Additive Manufacturing},pages={1--21},year={2026},publisher={Springer},doi={10.1007/s40964-026-01791-9},url={https://link.springer.com/article/10.1007/s40964-026-01791-9},}
TWS
Statics and dynamics of architected TPMS metallic beam structures: experiments and modeling
Agyapal Singh, Shahadat Hussain, Qinze Song, and 2 more authors
Architected materials enable unprecedented control of mechanical performance through internal topology; however, their behavior at engineering-relevant structural scales remains poorly understood. This study investigates the coupled static and dynamic response of metallic beam structures incorporating triply periodic minimal surface (TPMS) architectures. Gyroid- and Primitive-based beams are fabricated from AlSi7Mg alloy using a scalable sand-printing-assisted casting process and evaluated through a combined experimental–numerical framework integrating four-point bending, modal vibration testing, and validated finite element modeling. The results reveal a strong interaction between topology, relative density, and beam slenderness. Increasing relative density from 20% to 40% enhances peak bending load capacity from ∼5 to 12 kN and increases effective flexural rigidity from approximately 5 to 16kNm2, while increasing slenderness reduces load-bearing capacity by up to 60%, highlighting the dominant influence of structural geometry. Gyroid architectures outperform their Primitive counterparts at higher slenderness values. Furthermore, unified density–slenderness scaling laws that can accurately predict key static and dynamic performance metrics are derived, with coefficients of determination exceeding R2> 0.96. These findings establish predictive design relationships for structural-scale TPMS systems and support the deployment of lightweight, high-performance architected structures in civil, mechanical, and aerospace applications.
@article{singh2026statics,title={Statics and dynamics of architected TPMS metallic beam structures: experiments and modeling},author={Singh, Agyapal and Hussain, Shahadat and Song, Qinze and Moustafa, Mohamed A and Karathanasopoulos, Nikolaos},journal={Thin-Walled Structures},pages={115364},year={2026},publisher={Elsevier},doi={10.1016/j.tws.2026.115364},url={https://doi.org/10.1016/j.tws.2026.115364},}
2025
Phase transformation behavior of NiTi triply periodic minimal surface lattices fabricated by laser powder bed fusion
Shahadat Hussain, Ali N Alagha, and Wael Zaki
Journal of Materials Engineering and Performance, 2025
@article{hussain2025phase,title={Phase transformation behavior of NiTi triply periodic minimal surface lattices fabricated by laser powder bed fusion},author={Hussain, Shahadat and Alagha, Ali N and Zaki, Wael},journal={Journal of Materials Engineering and Performance},volume={34},number={2},pages={1136--1148},year={2025},publisher={Springer US, New York},}
2023
Inhomogeneous Microstructure due to Non-Uniform Solidification Rate in NiTi Triply Periodic Minimal Surface (TPMS) Structures Fabricated via Laser Powder Bed Fusion
Shahadat Hussain, Ali N. Alagha, and Wael Zaki
In ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022) Proceedings, 2023
@inproceedings{hussain2023inhomogeneous,title={Inhomogeneous Microstructure due to Non-Uniform Solidification Rate in NiTi Triply Periodic Minimal Surface (TPMS) Structures Fabricated via Laser Powder Bed Fusion},author={Hussain, Shahadat and Alagha, Ali N. and Zaki, Wael},booktitle={ASME 2022 International Mechanical Engineering Congress and Exposition (IMECE2022) Proceedings},year={2023},}
Microstructural and surface analysis of NiTi TPMS lattice sections fabricated by laser powder bed fusion
Shahadat Hussain, Ali N Alagha, Gregory N Haidemenopoulos, and 1 more author
@article{hussain2023microstructural,title={Microstructural and surface analysis of NiTi TPMS lattice sections fabricated by laser powder bed fusion},author={Hussain, Shahadat and Alagha, Ali N and Haidemenopoulos, Gregory N and Zaki, Wael},journal={Journal of Manufacturing Processes},volume={102},pages={375--386},year={2023},publisher={Elsevier},}
2022
Imperfections formation in thin layers of NiTi triply periodic minimal surface lattices fabricated using laser powder bed fusion
@article{hussain2022imperfections,title={Imperfections formation in thin layers of NiTi triply periodic minimal surface lattices fabricated using laser powder bed fusion},author={Hussain, Shahadat and Alagha, Ali N and Zaki, Wael},journal={Materials},volume={15},number={22},pages={7950},year={2022},publisher={MDPI},}
2021
Nano-CeO2 doped Cu–Al–Ni SMAs with enhanced mechanical as well as shape recovery characteristics
Shahadat Hussain, Abhishek Pandey, and Rupa Dasgupta
@article{hussain2021nano,title={Nano-CeO2 doped Cu--Al--Ni SMAs with enhanced mechanical as well as shape recovery characteristics},author={Hussain, Shahadat and Pandey, Abhishek and Dasgupta, Rupa},journal={Metals and Materials International},volume={27},number={6},pages={1478--1482},year={2021},publisher={The Korean Institute of Metals and Materials, Seoul},}
Additive manufacturing of shape memory alloys: A review with emphasis on powder bed systems
@article{alagha2021additive,title={Additive manufacturing of shape memory alloys: A review with emphasis on powder bed systems},author={Alagha, Ali N and Hussain, Shahadat and Zaki, Wael},journal={Materials \& Design},volume={204},pages={109654},year={2021},publisher={Elsevier},}
2020
Influence of niobium and silver on mechanical properties and shape memory behavior of Cu-12Al-4Mn alloys
Abhishek Pandey, Shahadat Hussain, Prasanth Nair, and 1 more author
@article{pandey2020influence,title={Influence of niobium and silver on mechanical properties and shape memory behavior of Cu-12Al-4Mn alloys},author={Pandey, Abhishek and Hussain, Shahadat and Nair, Prasanth and Dasgupta, Rupa},journal={Journal of Alloys and Compounds},volume={836},pages={155266},year={2020},publisher={Elsevier},}
2019
Designed polycrystalline ultra-high ductile boron doped Cu–Al–Ni based shape memory alloy
Shahadat Hussain, Abhishek Pandey, and Rupa Dasgupta
@article{dasgupta2019effect,title={Effect of microstructure on Roll-Ability and shape memory effect in Cu-based shape memory alloys},author={Dasgupta, Rupa and Pandey, Abhishek and Hussain, Shahadat and Jain, Ashish Kumar and Ansari, Ayub and Sampath, V},journal={Applied Innovation Research},volume={1},number={March},pages={29--37},year={2019},}
Effect of alloying, grain refiners and processing on properties and shape memory behaviours of Cu-Al-Ni based alloys for high temperature applications
Shahadat Hussain
Academy of Scientific and Innovative Research, Ghaziabad, India, 2019
@phdthesis{hussain2019effect,title={Effect of alloying, grain refiners and processing on properties and shape memory behaviours of Cu-Al-Ni based alloys for high temperature applications},author={Hussain, Shahadat},year={2019},school={Academy of Scientific and Innovative Research, Ghaziabad, India},}
2017
Effect of alloying additions on the properties affecting shape memory properties of Cu–12.5 Al–5Mn alloy
Rupa Dasgupta, Ashish Kumar Jain, Shahadat Hussain, and 2 more authors
In Frontiers in Materials Processing, Applications, Research and Technology: Select Proceedings of FiMPART 2015, 2017
@incollection{dasgupta2017effect,title={Effect of alloying additions on the properties affecting shape memory properties of Cu--12.5 Al--5Mn alloy},author={Dasgupta, Rupa and Jain, Ashish Kumar and Hussain, Shahadat and Pandey, Abhishek and Sampath, V},booktitle={Frontiers in Materials Processing, Applications, Research and Technology: Select Proceedings of FiMPART 2015},pages={377--390},year={2017},publisher={Springer Singapore, Singapore},}
2016
Effect of varying Al/Mn ratio on phase transformation in Cu–Al–Mn shape memory alloys
Ashish Kumar Jain, Shahadat Hussain, Pravir Kumar, and 2 more authors
Transactions of the Indian Institute of Metals, 2016
@article{jain2016effect,title={Effect of varying Al/Mn ratio on phase transformation in Cu--Al--Mn shape memory alloys},author={Jain, Ashish Kumar and Hussain, Shahadat and Kumar, Pravir and Pandey, Abhishek and Dasgupta, Rupa},journal={Transactions of the Indian Institute of Metals},volume={69},number={6},pages={1289--1295},year={2016},publisher={Springer India, New Delhi},}
Effect of nano CeO2 addition on the microstructure and properties of a Cu-Al-Ni shape memory alloy
Abhishek Pandey, Ashish Kumar Jain, Shahadat Hussain, and 2 more authors
@article{pandey2016effect,title={Effect of nano CeO2 addition on the microstructure and properties of a Cu-Al-Ni shape memory alloy},author={Pandey, Abhishek and Jain, Ashish Kumar and Hussain, Shahadat and Sampath, V and Dasgupta, Rupa},journal={Metallurgical and Materials Transactions B},volume={47},number={4},pages={2205--2210},year={2016},publisher={Springer US, New York},}
Study of effect of Fe, Cr and Ti on the martensite phase formation in Cu-12.5wt%Al-5wt%Mn SMA
Shahadat Hussain, Ashish K. Jain, Md. A. Ansari, and 2 more authors
@article{shahadat2016study,title={Study of effect of Fe, Cr and Ti on the martensite phase formation in Cu-12.5wt\%Al-5wt\%Mn SMA},author={Hussain, Shahadat and Jain, Ashish K. and Ansari, Md. A. and Pandey, Abhishek and Dasgupta, Rupa},journal={Advanced Materials Proceedings},volume={2},number={1},pages={22--25},year={2016},publisher={VBRI Press},}
2015
Role of alloying additions on the properties of Cu–Al–Mn shape memory alloys
Rupa Dasgupta, Ashish Kumar Jain, Pravir Kumar, and 2 more authors
@article{dasgupta2015role,title={Role of alloying additions on the properties of Cu--Al--Mn shape memory alloys},author={Dasgupta, Rupa and Jain, Ashish Kumar and Kumar, Pravir and Hussain, Shahadat and Pandey, Abhishek},journal={Journal of Alloys and Compounds},volume={620},pages={60--66},year={2015},publisher={Elsevier},}
Effects of Different Quaternary Additions in the Properties of a Cu-Al-Mn Shape Memory Alloy
Shahadat Hussain, Pravir Kumar, Ashish Kumar Jain, and 2 more authors
@article{hussain2015effects,title={Effects of Different Quaternary Additions in the Properties of a Cu-Al-Mn Shape Memory Alloy},author={Hussain, Shahadat and Kumar, Pravir and Jain, Ashish Kumar and Pandey, Abhishek and Dasgupta, Rupa},journal={Materials Performance and Characterization},volume={4},number={1},pages={226--235},year={2015},url={https://www.astm.org/mpc20150017.html},}
Changes in the properties of Cu-Al-Mn shape memory alloy due to quaternary addition of different elements
Pravir Kumar, Ashish Kumar Jain, Shahadat Hussain, and 2 more authors
@article{pravir2015changes,title={Changes in the properties of Cu-Al-Mn shape memory alloy due to quaternary addition of different elements},author={Kumar, Pravir and Jain, Ashish Kumar and Hussain, Shahadat and Pandey, Abhishek and Dasgupta, Rupa},journal={Revista Materia},volume={20},number={1},pages={284--292},year={2015},url={http://www.scielo.br/scielo.php?script=sci_text&pid=S1517-70762015000100026},}
Materials Performance and Characterization
Shahadat Hussain, Pravir Kumar, Ashish Kumar Jain, and 2 more authors
@article{hussain2015materials,title={Materials Performance and Characterization},author={Hussain, Shahadat and Kumar, Pravir and Jain, Ashish Kumar and Pandey, Abhishek and Dasgupta, Rupa},year={2015},}
2014
Effect of alloying constituents on the martensitic phase formation in some Cu-based SMAs
Rupa Dasgupta, Ashish Kumar Jain, Pravir Kumar, and 2 more authors
Journal of Materials Research and Technology, 2014
@article{dasgupta2014effect,title={Effect of alloying constituents on the martensitic phase formation in some Cu-based SMAs},author={Dasgupta, Rupa and Jain, Ashish Kumar and Kumar, Pravir and Hussein, Shahadat and Pandey, Abhishek},journal={Journal of Materials Research and Technology},volume={3},number={3},pages={264--273},year={2014},publisher={Elsevier},}